Timer Time: Using Internal ATTiny13A Chip’s Timer, "OVF" Interrupt Mode (slightly modified)

We could speeding the timer by pre-loading TCNT0 with a value between 0 and 255, so TCNT0’ll start count at our own value instead of zero. 

We have to pre-load the TCNT0 at the init subroutine, and pre-load again after flag is set, so we write the command at the timer subroutine. 

So, our code now will look like this 

.include "../tn13Adef.inc"

.def a=r16

.org 0000

    rjmp init

.org 0003

    rjmp timer

init:

    sbi ddrb,0          ; pin b0 output

    ldi a,0b00000101    ; prescaler 1024

    out TCCR0B,a

    ldi a,0b00000010    ; enable OVF

    out TIMSK0,a

    ldi a, 64           ; preload TCNT0

    out TCNT0,a

    sei                 ; enable interrupts globally

    

main:

    rjmp main

timer:

    sbi pinb,0          ; flip pin B0 bit

    ldi a,64            ; preload again 

    out TCNT0,a

    reti