Nugroho's blog.

Friday, October 28, 2016

Kesetimbangan



Dua bulan lalu di dinding kamar mandi mulai ada beberapa serangga seperti laron tetapi berukuran kecil,  sedikit lebih besar dari nyamuk. Semakin hari semakin banyak.

Tidak bisa diusir, disemprot pakai obat nyamuk pun tidak mati. Sampai saya membakar obat nyamuk di dalam kamar mandi pagi hari sebelum ngampus. Sorenya mereka tetap berada pada tempatnya, ckckck.

Sebulan yang lalu, mereka mulai berkurang, malah agak drastis. Tanpa diapa-apakan. Awalnya penasaran, apakah memang mereka pindah tempat atau yang lain. Sudahlah, yang penting mereka berangsur-angsur hilang.

Sampai suatu malam, tengah malam, ketika kebelet pipis. Di kamar mandi sedang ada sekitar lima cicak yang sedang berpesta pora, makan si serangga tadi. :)

Sekarang jadi suka senyum kalo lihat cicak-cicak gendut malas-malasan di dinding saat mandi pagi, :)


Thursday, September 1, 2016

Motivasi.

Ndak usah dipaksa maju jika tujuannya ada dibelakang.

Wednesday, August 31, 2016

Dalai Lama's Quote.

If you think you are too small to make a difference, try sleeping with a mosquito.

Tuesday, August 30, 2016

Pulang dari Kampus.


Alfa: Ayah, tadi jatuh pas naik sepeda gajah, berdarah. Ndak mandi, nanti perih.

(Sambil menunjukkan jempol kaki yang kulitnya terkelupas)

:)

Kangen.

Kinanthi: Lama nggak ngobrol ya Meg.

Meg: Iya Kin, lha sekarang semua sibuk ngurusi Mukidi.

K: (senyum)

Friday, August 19, 2016

Transmit serial data to an Android device, :)


.(Independent multitasking LEDs blink using Arduino FreeRTOS, and send the data wirelessly using bluetooth module HC-05. :) )



http://ift.tt/2b4YNBe.

the code is same as here

Independent Wireless Multitasking LEDs blink using Arduino FreeRTOS



and send the data wirelessly using bluetooth module HC-05. :)



http://ift.tt/2bi4MpP.
The code
#include <Arduino_FreeRTOS.h>
#include <SoftwareSerial.h>
SoftwareSerial mySerial(10, 11); // RX, TX

int n = 0;

// define two tasks for Blink & AnalogRead
void TaskBlink( void *pvParameters );
void TaskBlink2( void *pvParameters );
void TaskBlink3( void *pvParameters );
void TaskBlink4( void *pvParameters );
void TaskTadaa( void *pvParameters );

// the setup function runs once when you press reset or power the board
void setup() {
   // initialize serial communication at 9600 bits per second:
  mySerial.begin(9600);  

  // Now set up two tasks to run independently.
  xTaskCreate(
    TaskBlink
    ,  (const portCHAR *)"Blink"   // A name just for humans
    ,  128  // Stack size
    ,  NULL
    ,  2  // priority
    ,  NULL );
  xTaskCreate(TaskBlink2,(const portCHAR *)"Blink2",128, NULL,2,NULL );
  xTaskCreate(TaskBlink3,(const portCHAR *)"Blink3",128, NULL,2,NULL );
  xTaskCreate(TaskBlink4,(const portCHAR *)"Blink4",128, NULL,2,NULL );

  xTaskCreate(
    TaskTadaa
    ,  (const portCHAR *) "Tadaa"
    ,  128 // This stack size can be checked & adjusted by reading Highwater
    ,  NULL
    ,  1  // priority
    ,  NULL );

  // Now the task scheduler, which takes over control of scheduling individual tasks, is automatically started.
}

void loop()
{
  // Empty. Things are done in Tasks.
}

/*--------------------------------------------------*/
/*---------------------- Tasks ---------------------*/
/*--------------------------------------------------*/

void TaskBlink(void *pvParameters)  // This is a task.
{
  (void) pvParameters;

  // initialize digital pin 13 as an output.
  pinMode(13, OUTPUT);

  for (;;) // A Task shall never return or exit.
  {
    digitalWrite(13, HIGH);   // turn the LED on (HIGH is the voltage level)
    mySerial.println("LED 13 Nyala");
    vTaskDelay( 1000 / portTICK_PERIOD_MS ); // wait for one second
    digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW
    mySerial.println("LED 13 Padam");
    vTaskDelay( 1000 / portTICK_PERIOD_MS ); // wait for one second
  }
}
void TaskBlink2(void *pvParameters){
  (void) pvParameters;
  pinMode(2, OUTPUT);
  for (;;) {
    digitalWrite(2, HIGH); vTaskDelay( 2000 / portTICK_PERIOD_MS );mySerial.println("LED 2 Nyala");
    digitalWrite(2, LOW);  vTaskDelay( 2000 / portTICK_PERIOD_MS );mySerial.println("LED 2 Padam"); 
  }
}

void TaskBlink3(void *pvParameters){
  (void) pvParameters;
  pinMode(3, OUTPUT);
  for (;;) {
    digitalWrite(3, HIGH); vTaskDelay( 500 / portTICK_PERIOD_MS );mySerial.println("LED 3 Nyala");
    digitalWrite(3, LOW);  vTaskDelay( 1500 / portTICK_PERIOD_MS );mySerial.println("LED 3 Padam"); 
  }
}

void TaskBlink4(void *pvParameters){
  (void) pvParameters;
  pinMode(4, OUTPUT);
  for (;;) {
    digitalWrite(4, HIGH); vTaskDelay( 500 / portTICK_PERIOD_MS );mySerial.println("LED 4 Nyala");
    digitalWrite(4, LOW);  vTaskDelay( 250 / portTICK_PERIOD_MS );mySerial.println("LED 4 Padam"); 
  }
}

void TaskTadaa(void *pvParameters)  // This is a task.
{
  (void) pvParameters;
  for (;;)
  {
    // read the input on analog pin 0:
    n++;
    if (n>100){n = 0;}
    // print out the value you read:
    mySerial.print("Tadaa...");
    mySerial.println(n);
    vTaskDelay(2000/portTICK_PERIOD_MS);// 2 second delay
    // one tick delay (15ms) in between reads for stability
  }
}
323f (5) amp (1) android (12) apple (7) arduino (18) art (1) assembler (21) astina (4) ATTiny (23) blackberry (4) camera (3) canon (2) cerita (2) computer (106) crazyness (11) debian (1) delphi (39) diary (286) flash (8) fortran (6) freebsd (6) google apps script (8) guitar (2) HTML5 (10) IFTTT (7) Instagram (7) internet (12) iOS (5) iPad (6) iPhone (5) java (1) javascript (1) keynote (2) LaTeX (6) lazarus (1) linux (29) lion (15) mac (28) macbook air (8) macbook pro (3) macOS (1) Math (3) mathematica (1) maverick (6) mazda (4) microcontroler (35) mountain lion (2) music (37) netbook (1) nugnux (6) os x (36) php (1) Physicist (29) Picture (3) programming (189) Python (109) S2 (13) software (7) Soliloquy (125) Ubuntu (5) unix (4) Video (8) wayang (3) yosemite (3)