Stuck on DFU or Recovery Mode or Connect to Itunes Logo Loop on iPhone

In the recent months, we've seen reports here and there of iPhones getting stuck in a restart loop. The black screen with the Apple logo shows up, holds for a while, and then disappears again; repeat ad infinitum. While it's not clear yet exactly what's triggering the issue (the complainants suspect that it may be a recent application update to blame), there is a tried and true way to get your iPhone, iPod touch, iPad or older iPod back to square one: either use recovery mode or do a DFU restore. 


DFU (Device Firmware Update) mode is a means to getting your iPhone to interface with iTunes without iTunes automatically loading the latest version of iOS onto it (it skips the iBoot bootloader, for jailbreak aficionados). Differing from recovery mode -- where iTunes restores your iPhone to its original factory settings but with the latest iOS and firmware -- DFU mode allows you to change and choose the firmware you want to install onto your iPhone. For instance, you would use DFU mode if you want to install a previous version of iOS, jailbreak your iPhone or unlock your SIM. If (for whatever reason) standard recovery isn't working for you to get your device back to working condition, DFU may help you out.



Remember, if you restore your phone in any fashion (via the iTunes 'Restore' button, recovery mode or DFU) you will lose any modifications made to unsynced content or in-app data since your last iTunes sync (game states, voice memos, notes etc.). Be cautious.

So, here's the basic info on how to enter DFU mode (and it works for your iPod touch, too). Instructions may vary slightly by year or model.

• Connect your iPhone to your computer via USB and launch iTunes.
• Now turn your iPhone off. Hold down the sleep / power button at the top right of your iPhone, then slide your finger across the "slide to power off" button on your iPhone's screen. (If it won't turn off, press Home and Sleep/Power until the screen goes dark, then release.)
• Once your iPhone is off, hold down both the sleep / power button as well as the home button for 10 seconds. Once 10 seconds has elapsed, release the sleep / power button on your iPhone, but continue to hold the home button until the the above message has appeared in iTunes telling you that your iPhone has been detected in recovery mode. (If you just want to go to recovery mode, skip the 10- second hold on both buttons and simply connect the phone while holding down Home, then wait for 'Connect to iTunes' screen on the phone.)

If you see the Apple logo or the "connect to iTunes" screen on your iPhone, you're not in DFU mode. DFU leaves the screen of the iPhone completely black.

To exit DFU mode, simply hold down the sleep / power button and the home button together until your iPhone disappears from the device list in iTunes, then turn on the iPhone as normal.

Again, for most purposes (save jailbreaking) there's no practical difference between DFU and a regular restore, except and unless you're in a situation where your phone won't go into restore mode normally.

Now, what if iPhone stuck on restore loop instead of restart loop? It often happen if we upgrade the iOS.  I've tried to exit it using "just" DFU mode with no result. Apparently it needs more step, ... and it is...

While in DFU mode

• while you plugged your iPhone and opening the itunes go to windows/system32/drivers/etc and open "hosts" file as administrator with notepad (Mac user: use Shift+Command+G and type /etc than open hosts file using TextEdit)
• remove the last to lines with word apple in it (or add # at the begining of line)
• safe the change
• go to itunes shift+ restore choose the custom ipsw (Mac user: alt+ restore)
• enjoy the restore with out any errors no 3014 or 1600 or any other error

Maybe, on Mac, we couldn't safe the change of hosts file or even worse, couldn't open it. In this case, 

open Terminal Apps

type

sudo cp /etc/hosts ./Desktop (enter your password)

sudo chmod 777 ./Desktop/hosts

edit hosts file in Desktop using TextEdit and safe it, back to Terminal

sudo rm /etc/hosts /etc/hostsOld

sudo cp ./Desktop/hosts /etc/hosts

Monte Carlo PI

 
c    calculating pi by throwing stones
c
 PROGRAM stones
 IMPLICIT none
c
c    declarations
 REAL*8 area, x, y, DRAND48
 INTEGER i, max, pi, seed
c
c    set parameters (number of stones, seed for generator)
 max = 1000
 seed = 11168
c
c    open file, set initial value, seed generator
 OPEN(6, FILE='pif.dat')
 pi=0
 call seed48(seed)
c
c    execute
 DO 10 i=1, max
    x = DRAND48()*2-1
    y = DRAND48()*2-1 
    IF ((x*x + y*y) .LT. 1) THEN
       pi = pi+1
    ENDIF
    area = 4.0 * pi/REAL(i)
    WRITE(6,*) i, area
 10  CONTINUE
  STOP
  END

PI on MPI

still trying...

 program main
      include "mpif.h"
      double precision  PI25DT
      parameter        (PI25DT = 3.141592653589793238462643d0)
      double precision  mypi, pi, h, sum, x, f, a
      integer n, myid, numprocs, i, ierr
c                                 function to integrate
      f(a) = 4.d0 / (1.d0 + a*a)

      call MPI_INIT(ierr)
      call MPI_COMM_RANK(MPI_COMM_WORLD, myid, ierr)
      call MPI_COMM_SIZE(MPI_COMM_WORLD, numprocs, ierr)


 10   if ( myid .eq. 0 ) then
         print *, 'Enter the number of intervals: (0 quits) '
         read(*,*) n
      endif
c                                 broadcast n
      call MPI_BCAST(n,1,MPI_INTEGER,0,MPI_COMM_WORLD,ierr)
c                                 check for quit signal
      if ( n .le. 0 ) goto 30
c                                 calculate the interval size
      h = 1.0d0/n
      sum  = 0.0d0
      do 20 i = myid+1, n, numprocs
         x = h * (dble(i) - 0.5d0)
         sum = sum + f(x)
 20   continue
      mypi = h * sum
c                                 collect all the partial sums
      call MPI_REDUCE(mypi,pi,1,MPI_DOUBLE_PRECISION,MPI_SUM,0, 
     &                  MPI_COMM_WORLD,ierr)
c                                 node 0 prints the answer.
      if (myid .eq. 0) then
         print *, 'pi is ', pi, ' Error is', abs(pi - PI25DT)
      endif
      goto 10
 30   call MPI_FINALIZE(ierr)
      stop
      end

Mencari Pi

Jumlah iterasi:

Nilai Pi

Mencoba tanpa webworker. Pi dapat dihitung dengan kode berikut

var Pi=0, n=1, c=100000;
for (var i=0;i<=c;i++) {
  Pi=Pi+(4/n)-(4/(n+2));
  n=n+4;
}

perintah dalam tag <script> adalah sebagai berikut

function HitungPi()
{
    var loop = document.getElementById("loop");
    var c = parseInt(loop.value);
    var f = parseFloat(loop.value);
    var Pi=0, n=1;

    try {
      if (isNaN(c) || f != c ) {
        throw("errInvalidNumber");
      } else if (c<=0) {
        throw("errNegativeNumber");
      }
 
      for (var i=0;i<=c;i++) {
        Pi=Pi+(4/n)-(4/(n+2));
        n=n+4;
      }
      document.getElementById("PiValue").innerHTML = Pi;
    } catch (e) {
      var msg = "Input Error: ";
      if (e=="errInvalidNumber")
        msg += "harus angka.";
      else if (e=="errNegativeNumber")
        msg += "Input harus positif.";
      else
        msg += e.message;
      
        alert(msg);
    }
}

.
Perintah dalam <body>

<label for="loop">Jumlah iterasi:</label>
<input id="loop" type="number" value="100" />
<input type="button" onclick="HitungPi()" value="Hitung Pi" />
<div id="PiValue">Nilai Pi</div>

Hello Canvas World

canvas's not supported
Back to first again
Tulisan di atas ditulis dalam canvas seperti kode di bawah. Di sini perintahnya adalah

context.fillText('Hello Canvas World',canvas.width/2-150,canvas.height/2+15);

context adalah '2d' dari canvas, dalam hal ini context kotak yang menyimpan perintah-perintah '2d' canvas seperti contoh diatas, yaitu menulis text.

fillText('tulisan', posisi_x,posisi_y) adalah perintah untuk menampilkan tulisan dengan warna sesuai fillStyle, yaitu 'green'

strokeText('tulisan', posisi_x,posisi_y) adalah perintah untuk menampilkan tulisan dengan warna 'tepi' sesuai strokeStyle yaitu 'red'

var  canvas = document.getElementById('canvasexample'),
 context = canvas.getContext('2d');

context.font = '38pt Arial';
context.fillStyle = 'green';
context.strokeStyle = 'red';

context.fillText('Hello Canvas',canvas.width/2-150,canvas.height/2+15);
context.strokeText('Hello Canvas',canvas.width/2-150,canvas.height/2+15);

My Blackberry Experience (part3)

In term of ease of use, I prefer non qwerty phone, thus, I prefer other devices than blackberries (but z10, maybe)



Why I don't like qwerty phone, because I didn't use to it. My first smartphone has candybar form factor, w960i, and I barely use it keyboard because I prefer its handwriting method using stylus.



I still like it and hope iPhone include this feature (unfortunatelly Apple don't bother to include it). I think it's possible cause google applied it in its search engine (work on i Phone too)



I start to used dvorak on my macbook pro in 2009, and since then I "abuse" my home PC, my HP tx2100us, and two server at work keyboards to became dvorak layout. It's simpler and more balance (right and left stroke). Of course blackberry, with its infamous qwerty keyboard, slow me down a bit.



Unfortunately, it applies to iPhone too. Although it allows for changing layout, it don't provide dvorak. Nevertheless, I still prefer iPhone over blackberry because its ability to change its keyboard layout. I'm currently use azerty layout on iPhone.







http://aravir-rose.blogspot.com

My Blackberry Experience (part 2)

So, how about the Blackberry killer app, Blackberry Messenger?



I personally don't know what's so great about it and what's really different with others messenger apps.



My sister in law tell me that BBM benefit is ability to block people and prevent his/her to contact us. Because BBM connect people through PIN, blocked people won't be able to contact via phone number if didn't know our number or we change our number.



I though of that and feel that it's ridiculous. We know yahoo messenger, google talk, whatsapp and other messenger have blocking feature as well.



Another problem is PIN itself. It's tied to one device. While it comes handy as we don't need to create new account as we have new number, it ties us to just one device. If we get another blackberry device, we have to reinvite our contacts again (or just export it? IDK).



Sure whatsapp or LINE is very vulnerable, anyone had our number is able to contact us but what's so bad about it? They still able to text or call us, don't they? And it have (along yahoo, gtalk and other) great portability; we're free to change device and still use same account, even use it in desktop computer.



Maybe it's just me but I don't want to be tied with one device. (Don't you want to upgrade your blackberry device?)



Blackberry Messenger is still great app though, with million users of course, every blackberry owner use it. But in the end, I still found whatsapp or other traditional instant messenger come handy in term of portability.







http://aravir-rose.blogspot.com