Arduino Nano as Programmer to Upgrade USBASP Firmware [Solved]

This post’s for self doc only. Went to work full day, furiously, in front of My Mac, from Saturday morning to about 7 pm because of single line of warning. 

avrdude: warning: cannot set sck period. please check for usbasp firmware update. 

Yeah, maybe it’s not worth my time but still...  

Anyway, I use my arduino Nano as ISP programmer, to upload the new firmware to USBASP.  

On Arduino IDE, open file, example, ArduinoISP. 

Compile it.

Upload arduinoISP sketch to  Nano. 

Connect the pins. 

Arduino Nano — USBASP

5V — 2

GND — 10

13 —  7

12 —  9 (MISO)

11 —  1 (MOSI)

10 —   5 (RESET)

Don’t forget to connect the jumper J2 or JP2 to enable self programming on USBASP. 

Don’t use 2011’s firmware version, use 2009’s instead

I have two example of command, for windows

avrdude -C ../etc/avrdude.conf -c avrisp -P COM3 -b 19200 -p m8 -v
avrdude -C ../etc/avrdude.conf -c avrisp -P COM3 -b 19200 -p m8 -U flash:r:original_firmware.bin:r
avrdude -C ../etc/avrdude.conf -c avrisp -P COM3 -b 19200 -p m8 -U flash:w:original_firmware.bin
avrdude -C ../etc/avrdude.conf -c avrisp -P COM3 -b 19200 -p m8 -U flash:w:c:\usbasp.atmega8.2011-05- 28.hex

and

avrdude -p m8 -b 19200 -c avrisp -P com2 -U flash:r:usbasp.atmega8.hobbyking.hex
avrdude -p m8 -b 19200 -c avrisp -P com2 -U flash:w:usbasp.atmega8.2009-02-28.hex

Have to modify that to satisfy my Mac environment

I’m sure my Mac have no COM port, and my successful avrdude command is like this

avrdude -p attiny13A -P usb -c usbasp -n

avrdude -p t13 -c usbasp -P usb -U flash:w:template.hex 

so maybe I have to use -P usb

avrdude  -c avrisp  -P usb -b 19200 -p m8 -v
avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/usr/local/CrossPack-AVR-20131216/etc/avrdude.conf"
         User configuration file is "/Users/nugroho/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : usb
         Using Programmer              : avrisp
         Overriding Baud Rate          : 19200
avrdude: ser_open(): can't open device "usb": No such file or directory
avrdude done.  Thank you.
Nugrohos-MacBook-Air:firmware nugroho$ 
#

no
OK
again

Nugrohos-MacBook-Air:firmware nugroho$ avrdude -p m8 -c avrisp -b 19200 -P /dev/cu.wchusbserial1420 -v

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/usr/local/CrossPack-AVR-20131216/etc/avrdude.conf"
         User configuration file is "/Users/nugroho/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/cu.wchusbserial1420
         Using Programmer              : avrisp
         Overriding Baud Rate          : 19200
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x15
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x15
         AVR Part                      : ATmega8
         Chip Erase delay              : 10000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom         4    20   128    0 no        512    4      0  9000  9000 0xff 0xff
           flash         33    10    64    0 yes      8192   64    128  4500  4500 0xff 0x00
           lfuse          0     0     0    0 no          1    0      0  2000  2000 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  2000  2000 0x00 0x00
           lock           0     0     0    0 no          1    0      0  2000  2000 0x00 0x00
           calibration    0     0     0    0 no          4    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : STK500
         Description     : Atmel AVR ISP

avrdude: stk500_getparm(): (a) protocol error, expect=0x14, resp=0x14

avrdude: stk500_getparm(): (a) protocol error, expect=0x14, resp=0x02

avrdude: stk500_getparm(): (a) protocol error, expect=0x14, resp=0x10
         Hardware Version: -1597263620
         Firmware Version: 3296192.-1597263620
         Topcard         : STK502
         Vtarget         : 1.8 V
         Varef           : 0.0 V
         Oscillator      : Off
         SCK period      : 0.1 us

avrdude: stk500_initialize(): (b) protocol error, expect=0x10, resp=0x01
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.

avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x10

avrdude done.  Thank you.

Nugrohos-MacBook-Air:firmware nugroho$ 


avrdude -p m8 -b 19200 -c avrisp -P /dev/cu.wchusbserial1420
 -U flash:r:usbasp.atmega8.original.hex

Press reset on Arduino Nano before enter command above

Nugrohos-MacBook-Air:firmware nugroho$ avrdude -p m8 -c avrisp -b 19200 -P /dev/cu.wchusbserial1420 -v

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/usr/local/CrossPack-AVR-20131216/etc/avrdude.conf"
         User configuration file is "/Users/nugroho/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/cu.wchusbserial1420
         Using Programmer              : avrisp
         Overriding Baud Rate          : 19200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
         AVR Part                      : ATmega8
         Chip Erase delay              : 10000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom         4    20   128    0 no        512    4      0  9000  9000 0xff 0xff
           flash         33    10    64    0 yes      8192   64    128  4500  4500 0xff 0x00
           lfuse          0     0     0    0 no          1    0      0  2000  2000 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  2000  2000 0x00 0x00
           lock           0     0     0    0 no          1    0      0  2000  2000 0x00 0x00
           calibration    0     0     0    0 no          4    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : STK500
         Description     : Atmel AVR ISP
         Hardware Version: 2
         Firmware Version: 1.18
         Topcard         : Unknown
         Vtarget         : 0.0 V
         Varef           : 0.0 V
         Oscillator      : Off
         SCK period      : 0.1 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.11s

avrdude: Device signature = 0x000000 (retrying)

Reading | ################################################## | 100% 0.11s

avrdude: Device signature = 0x000000 (retrying)

Reading | ################################################## | 100% 0.13s

avrdude: Device signature = 0x000000
avrdude: Yikes!  Invalid device signature.
         Double check connections and try again, or use -F to override
         this check.


avrdude done.  Thank you.

Nugrohos-MacBook-Air:firmware nugroho$ 

Using -F option

Nugrohos-MacBook-Air:firmware nugroho$ avrdude -p m8 -c avrisp -b 19200 -P /dev/cu.wchusbserial1420 -v -F

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/usr/local/CrossPack-AVR-20131216/etc/avrdude.conf"
         User configuration file is "/Users/nugroho/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/cu.wchusbserial1420
         Using Programmer              : avrisp
         Overriding Baud Rate          : 19200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
         AVR Part                      : ATmega8
         Chip Erase delay              : 10000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom         4    20   128    0 no        512    4      0  9000  9000 0xff 0xff
           flash         33    10    64    0 yes      8192   64    128  4500  4500 0xff 0x00
           lfuse          0     0     0    0 no          1    0      0  2000  2000 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  2000  2000 0x00 0x00
           lock           0     0     0    0 no          1    0      0  2000  2000 0x00 0x00
           calibration    0     0     0    0 no          4    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : STK500
         Description     : Atmel AVR ISP
         Hardware Version: 2
         Firmware Version: 1.18
         Topcard         : Unknown
         Vtarget         : 0.0 V
         Varef           : 0.0 V
         Oscillator      : Off
         SCK period      : 0.1 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.11s

avrdude: Device signature = 0x000000 (retrying)

Reading | ################################################## | 100% 0.13s

avrdude: Device signature = 0x000000 (retrying)

Reading | ################################################## | 100% 0.13s

avrdude: Device signature = 0x000000
avrdude: Yikes!  Invalid device signature.
avrdude: Expected signature for ATmega8 is 1E 93 07
avrdude: safemode: lfuse reads as 0
avrdude: safemode: hfuse reads as 0

avrdude: safemode: lfuse reads as 0
avrdude: safemode: hfuse reads as 0
avrdude: safemode: Fuses OK (H:FF, E:00, L:00)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:firmware nugroho$ 

Now backup

Nugrohos-MacBook-Air:attiny13a nugroho$ avrdude -p m8 -c avrisp -b 19200 -P /dev/cu.wchusbserial1420 -U flash:r:original_firmware.hex:r -F
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.11s

avrdude: Device signature = 0x000000 (retrying)

Reading | ################################################## | 100% 0.11s

avrdude: Device signature = 0x000000 (retrying)

Reading | ################################################## | 100% 0.13s

avrdude: Device signature = 0x000000
avrdude: Yikes!  Invalid device signature.
avrdude: Expected signature for ATmega8 is 1E 93 07
avrdude: reading flash memory:

Reading | ################################################## | 100% 15.04s

avrdude: writing output file "original_firmware.hex"

avrdude: safemode: Fuses OK (H:FF, E:00, L:00)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:attiny13a nugroho$ ls
blinkLED_A			coba2				firmware.hex			original_firmware.hex		usbasp.atmega8.2009-02-28.hex
coba1				coba3				lcdNO				tn13Adef.inc
Nugrohos-MacBook-Air:attiny13a nugroho$ 

And upload new firmware

Nugrohos-MacBook-Air:attiny13a nugroho$ avrdude -p m8 -c avrisp -b 19200 -P /dev/cu.wchusbserial1420 -U flash:w:firmware.hex -F
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.11s

avrdude: Device signature = 0x000000 (retrying)

Reading | ################################################## | 100% 0.11s

avrdude: Device signature = 0x000000 (retrying)

Reading | ################################################## | 100% 0.13s

avrdude: Device signature = 0x000000
avrdude: Yikes!  Invalid device signature.
avrdude: Expected signature for ATmega8 is 1E 93 07
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "firmware.hex"
avrdude: input file firmware.hex auto detected as Intel Hex
avrdude: writing flash (3966 bytes):

Writing | ################################################## | 100% 9.16s

avrdude: 3966 bytes of flash written
avrdude: verifying flash memory against firmware.hex:
avrdude: load data flash data from input file firmware.hex:
avrdude: input file firmware.hex auto detected as Intel Hex
avrdude: input file firmware.hex contains 3966 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 7.29s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
         0x00 != 0x3b
avrdude: verification error; content mismatch

avrdude: safemode: Fuses OK (H:FF, E:00, L:00)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:attiny13a nugroho$ 

try it

Nugrohos-MacBook-Air:coba3 nugroho$ avrdude -p t13 -c usbasp -v

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/usr/local/CrossPack-AVR-20131216/etc/avrdude.conf"
         User configuration file is "/Users/nugroho/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : usb
         Using Programmer              : usbasp
         AVR Part                      : ATtiny13
         Chip Erase delay              : 4000 us
         PAGEL                         : P00
         BS2                           : P00
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65     5     4    0 no         64    4      0  4000  4000 0xff 0xff
           flash         65     6    32    0 yes      1024   32     32  4500  4500 0xff 0xff
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00
           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           calibration    0     0     0    0 no          2    0      0     0     0 0x00 0x00
           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

         Programmer Type : usbasp
         Description     : USBasp, http://www.fischl.de/usbasp/

avrdude: auto set sck period (because given equals null)
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e9007
avrdude: safemode: lfuse reads as 6A
avrdude: safemode: hfuse reads as FF

avrdude: safemode: lfuse reads as 6A
avrdude: safemode: hfuse reads as FF
avrdude: safemode: Fuses OK (H:FF, E:FF, L:6A)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:coba3 nugroho$ 


Nugrohos-MacBook-Air:coba3 nugroho$ avrdude -p t13 -c usbasp -U flash:w:coba3.s.hex 

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e9007
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file "coba3.s.hex"
avrdude: input file coba3.s.hex auto detected as Intel Hex
avrdude: writing flash (34 bytes):

Writing | ################################################## | 100% 0.05s

avrdude: 34 bytes of flash written
avrdude: verifying flash memory against coba3.s.hex:
avrdude: load data flash data from input file coba3.s.hex:
avrdude: input file coba3.s.hex auto detected as Intel Hex
avrdude: input file coba3.s.hex contains 34 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.03s

avrdude: verifying ...
avrdude: 34 bytes of flash verified

avrdude: safemode: Fuses OK (H:FF, E:FF, L:6A)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:coba3 nugroho$ 

try 2011 version

Nugrohos-MacBook-Air:attiny13a nugroho$ ls
blinkLED_A			firmware.hex			usbasp.atmega8.2009-02-28.hex
coba1				lcdNO				usbasp.atmega8.2011-05-28.hex
coba2				original_firmware.hex
coba3				tn13Adef.inc
Nugrohos-MacBook-Air:attiny13a nugroho$ avrdude -p m8 -c avrisp -b 19200 -P /dev/cu.wchusbserial1420 -v -F

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/usr/local/CrossPack-AVR-20131216/etc/avrdude.conf"
         User configuration file is "/Users/nugroho/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/cu.wchusbserial1420
         Using Programmer              : avrisp
         Overriding Baud Rate          : 19200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
         AVR Part                      : ATmega8
         Chip Erase delay              : 10000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom         4    20   128    0 no        512    4      0  9000  9000 0xff 0xff
           flash         33    10    64    0 yes      8192   64    128  4500  4500 0xff 0x00
           lfuse          0     0     0    0 no          1    0      0  2000  2000 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  2000  2000 0x00 0x00
           lock           0     0     0    0 no          1    0      0  2000  2000 0x00 0x00
           calibration    0     0     0    0 no          4    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : STK500
         Description     : Atmel AVR ISP
         Hardware Version: 2
         Firmware Version: 1.18
         Topcard         : Unknown
         Vtarget         : 0.0 V
         Varef           : 0.0 V
         Oscillator      : Off
         SCK period      : 0.1 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.11s

avrdude: Device signature = 0x1e9307
avrdude: safemode: lfuse reads as 9F
avrdude: safemode: hfuse reads as D9

avrdude: safemode: lfuse reads as 9F
avrdude: safemode: hfuse reads as D9
avrdude: safemode: Fuses OK (H:FF, E:D9, L:9F)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:attiny13a nugroho$ avrdude -p m8 -c avrisp -b 19200 -P /dev/cu.wchusbserial1420 -U flash:w: -F
.DS_Store                      coba3/                         tn13Adef.inc
blinkLED_A/                    firmware.hex                   usbasp.atmega8.2009-02-28.hex
coba1/                         lcdNO/                         usbasp.atmega8.2011-05-28.hex
coba2/                         original_firmware.hex          
Nugrohos-MacBook-Air:attiny13a nugroho$ avrdude -p m8 -c avrisp -b 19200 -P /dev/cu.wchusbserial1420 -U flash:w:usbasp.atmega8.2011-05-28.hex -F
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.11s

avrdude: Device signature = 0x1e9307
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "usbasp.atmega8.2011-05-28.hex"
avrdude: input file usbasp.atmega8.2011-05-28.hex auto detected as Intel Hex
avrdude: writing flash (4700 bytes):

Writing | ################################################## | 100% 10.94s

avrdude: 4700 bytes of flash written
avrdude: verifying flash memory against usbasp.atmega8.2011-05-28.hex:
avrdude: load data flash data from input file usbasp.atmega8.2011-05-28.hex:
avrdude: input file usbasp.atmega8.2011-05-28.hex auto detected as Intel Hex
avrdude: input file usbasp.atmega8.2011-05-28.hex contains 4700 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 8.70s

avrdude: verifying ...
avrdude: 4700 bytes of flash verified

avrdude: safemode: Fuses OK (H:FF, E:D9, L:9F)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:attiny13a nugroho$ 

It's way promising

Nugrohos-MacBook-Air:coba3 nugroho$ avrdude -p t13 -c usbasp -n

avrdude: error: programm enable: target doesn't answer. 1 
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.


avrdude done.  Thank you.

Nugrohos-MacBook-Air:coba3 nugroho$ avrdude -p t13 -c usbasp -P usb

avrdude: error: programm enable: target doesn't answer. 1 
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.


avrdude done.  Thank you.

not
go to original 2009 version

Nugrohos-MacBook-Air:attiny13a nugroho$ avrdude -p m8 -c avrisp -b 19200 -P /dev/cu.wchusbserial1420 -U flash:w:usbasp.atmega8.20 -F
usbasp.atmega8.2009-02-28.hex  usbasp.atmega8.2011-05-28.hex  
Nugrohos-MacBook-Air:attiny13a nugroho$ avrdude -p m8 -c avrisp -b 19200 -P /dev/cu.wchusbserial1420 -U flash:w:usbasp.atmega8.2009-02-28.hex -F
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.11s

avrdude: Device signature = 0x1e9307
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "usbasp.atmega8.2009-02-28.hex"
avrdude: input file usbasp.atmega8.2009-02-28.hex auto detected as Intel Hex
avrdude: writing flash (3826 bytes):

Writing | ################################################## | 100% 8.86s

avrdude: 3826 bytes of flash written
avrdude: verifying flash memory against usbasp.atmega8.2009-02-28.hex:
avrdude: load data flash data from input file usbasp.atmega8.2009-02-28.hex:
avrdude: input file usbasp.atmega8.2009-02-28.hex auto detected as Intel Hex
avrdude: input file usbasp.atmega8.2009-02-28.hex contains 3826 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 7.05s

avrdude: verifying ...
avrdude: 3826 bytes of flash verified

avrdude: safemode: Fuses OK (H:FF, E:D9, L:9F)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:attiny13a nugroho$ 
Nugrohos-MacBook-Air:coba3 nugroho$ avrdude -p t13 -c usbasp 

avrdude: error: programm enable: target doesn't answer. 1 
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.


avrdude done.  Thank you.

Nugrohos-MacBook-Air:coba3 nugroho$ 

back to patched 2009 version

Nugrohos-MacBook-Air:attiny13a nugroho$ avrdude -p m8 -c avrisp -b 19200 -P /dev/cu.wchusbserial1420 -U flash:w:firmware.hex -F
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.11s

avrdude: Device signature = 0x1e9307
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "firmware.hex"
avrdude: input file firmware.hex auto detected as Intel Hex
avrdude: writing flash (3966 bytes):

Writing | ################################################## | 100% 9.16s

avrdude: 3966 bytes of flash written
avrdude: verifying flash memory against firmware.hex:
avrdude: load data flash data from input file firmware.hex:
avrdude: input file firmware.hex auto detected as Intel Hex
avrdude: input file firmware.hex contains 3966 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 7.29s

avrdude: verifying ...
avrdude: 3966 bytes of flash verified

avrdude: safemode: Fuses OK (H:FF, E:D9, L:9F)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:attiny13a nugroho$ 

Nugrohos-MacBook-Air:coba3 nugroho$ avrdude -p t13 -c usbasp 

avrdude: error: programm enable: target doesn't answer. 1 
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.


avrdude done.  Thank you.

trying to upload using arduino nano as isp to ATTiny13A

Nugrohos-MacBook-Air:coba3 nugroho$ avrdude -p t13 -c avrisp -P /dev/cu.wchusbserial1420 
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
^C

.

hm, maybe the ATTiny’s broken

here the -v -vv and -vvv

Nugrohos-MacBook-Air:coba3 nugroho$ avrdude -p t13 -c usbasp -v

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/usr/local/CrossPack-AVR-20131216/etc/avrdude.conf"
         User configuration file is "/Users/nugroho/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : usb
         Using Programmer              : usbasp
         AVR Part                      : ATtiny13
         Chip Erase delay              : 4000 us
         PAGEL                         : P00
         BS2                           : P00
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65     5     4    0 no         64    4      0  4000  4000 0xff 0xff
           flash         65     6    32    0 yes      1024   32     32  4500  4500 0xff 0xff
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00
           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           calibration    0     0     0    0 no          2    0      0     0     0 0x00 0x00
           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

         Programmer Type : usbasp
         Description     : USBasp, http://www.fischl.de/usbasp/

avrdude: auto set sck period (because given equals null)
avrdude: error: programm enable: target doesn't answer. 1 
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.


avrdude done.  Thank you.

Nugrohos-MacBook-Air:coba3 nugroho$ avrdude -p t13 -c usbasp -vv

avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/usr/local/CrossPack-AVR-20131216/etc/avrdude.conf"
         User configuration file is "/Users/nugroho/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : usb
         Using Programmer              : usbasp
avrdude: seen device from vendor ->www.fischl.de<- data-blogger-escaped--="" data-blogger-escaped-avrdude:="" data-blogger-escaped-product="" data-blogger-escaped-seen="">USBasp<- data-blogger-escaped------------="" data-blogger-escaped----------="" data-blogger-escaped-------="" data-blogger-escaped------="" data-blogger-escaped-----="" data-blogger-escaped--="" data-blogger-escaped--c="" data-blogger-escaped--f="" data-blogger-escaped--p="" data-blogger-escaped--vvv="" data-blogger-escaped-0="" data-blogger-escaped-0x00="" data-blogger-escaped-0x53="" data-blogger-escaped-0xff="" data-blogger-escaped-100="" data-blogger-escaped-1024="" data-blogger-escaped-16="" data-blogger-escaped-17:26:24="" data-blogger-escaped-1="" data-blogger-escaped-2000-2005="" data-blogger-escaped-2007-2009="" data-blogger-escaped-200="" data-blogger-escaped-2013="" data-blogger-escaped-25="" data-blogger-escaped-2="" data-blogger-escaped-32="" data-blogger-escaped-3="" data-blogger-escaped-4000="" data-blogger-escaped-4500="" data-blogger-escaped-4="" data-blogger-escaped-5="" data-blogger-escaped-6.0.1="" data-blogger-escaped-64="" data-blogger-escaped-65="" data-blogger-escaped-6="" data-blogger-escaped-:="" data-blogger-escaped-a="" data-blogger-escaped-again="" data-blogger-escaped-ages="" data-blogger-escaped-and="" data-blogger-escaped-answer.="" data-blogger-escaped-at="" data-blogger-escaped-attiny13="" data-blogger-escaped-auto="" data-blogger-escaped-avr="" data-blogger-escaped-avrdude.conf="" data-blogger-escaped-avrdude:="" data-blogger-escaped-avrdude="" data-blogger-escaped-avrduderc="" data-blogger-escaped-because="" data-blogger-escaped-block="" data-blogger-escaped-brian="" data-blogger-escaped-bs2="" data-blogger-escaped-bytedelay="" data-blogger-escaped-c="" data-blogger-escaped-calibration="" data-blogger-escaped-check.="" data-blogger-escaped-check="" data-blogger-escaped-chip="" data-blogger-escaped-cmdexedelay="" data-blogger-escaped-compiled="" data-blogger-escaped-configuration="" data-blogger-escaped-connections="" data-blogger-escaped-copyright="" data-blogger-escaped-dean="" data-blogger-escaped-dec="" data-blogger-escaped-dedicated="" data-blogger-escaped-delay="" data-blogger-escaped-description="" data-blogger-escaped-detail="" data-blogger-escaped-device="" data-blogger-escaped-disposition="" data-blogger-escaped-does="" data-blogger-escaped-doesn="" data-blogger-escaped-done.="" data-blogger-escaped-double="" data-blogger-escaped-eeprom="" data-blogger-escaped-enable:="" data-blogger-escaped-equals="" data-blogger-escaped-erase="" data-blogger-escaped-error:="" data-blogger-escaped-etc="" data-blogger-escaped-exist="" data-blogger-escaped-failed="" data-blogger-escaped-file="" data-blogger-escaped-flash="" data-blogger-escaped-from="" data-blogger-escaped-given="" data-blogger-escaped-hfuse="" data-blogger-escaped-http:="" data-blogger-escaped-indx="" data-blogger-escaped-initialization="" data-blogger-escaped-is="" data-blogger-escaped-joerg="" data-blogger-escaped-lfuse="" data-blogger-escaped-local="" data-blogger-escaped-lock="" data-blogger-escaped-maxw="" data-blogger-escaped-memory="" data-blogger-escaped-minw="" data-blogger-escaped-mode="" data-blogger-escaped-no="" data-blogger-escaped-not="" data-blogger-escaped-nugroho="" data-blogger-escaped-nugrohos-macbook-air:coba3="" data-blogger-escaped-null="" data-blogger-escaped-on="" data-blogger-escaped-or="" data-blogger-escaped-override="" data-blogger-escaped-p00="" data-blogger-escaped-page="" data-blogger-escaped-paged="" data-blogger-escaped-pagel="" data-blogger-escaped-parallel="" data-blogger-escaped-part="" data-blogger-escaped-period="" data-blogger-escaped-poll="" data-blogger-escaped-polled="" data-blogger-escaped-pollindex="" data-blogger-escaped-pollvalue="" data-blogger-escaped-port="" data-blogger-escaped-program="" data-blogger-escaped-programm="" data-blogger-escaped-programmer="" data-blogger-escaped-pulse="" data-blogger-escaped-rc="-1" data-blogger-escaped-readback="" data-blogger-escaped-regular="" data-blogger-escaped-reset="" data-blogger-escaped-retry="" data-blogger-escaped-rosspack-avr-20131216="" data-blogger-escaped-sck="" data-blogger-escaped-seen="" data-blogger-escaped-serial="" data-blogger-escaped-sers="" data-blogger-escaped-set="" data-blogger-escaped-signature="" data-blogger-escaped-size="" data-blogger-escaped-skipping="" data-blogger-escaped-stabdelay="" data-blogger-escaped-syncloops="" data-blogger-escaped-system="" data-blogger-escaped-t13="" data-blogger-escaped-t="" data-blogger-escaped-target="" data-blogger-escaped-thank="" data-blogger-escaped-this="" data-blogger-escaped-timeout="" data-blogger-escaped-to="" data-blogger-escaped-try="" data-blogger-escaped-type="" data-blogger-escaped-us="" data-blogger-escaped-usb="" data-blogger-escaped-usbasp="" data-blogger-escaped-usbasp_open="" data-blogger-escaped-use="" data-blogger-escaped-user="" data-blogger-escaped-using="" data-blogger-escaped-usr="" data-blogger-escaped-vendor="" data-blogger-escaped-version="" data-blogger-escaped-wide="" data-blogger-escaped-wunsch="" data-blogger-escaped-www.bdmicro.com="" data-blogger-escaped-www.fischl.de="" data-blogger-escaped-yes="" data-blogger-escaped-you.="">www.fischl.de<- data-blogger-escaped--="" data-blogger-escaped-avrdude:="" data-blogger-escaped-product="" data-blogger-escaped-seen="">USBasp<- data-blogger-escaped------------="" data-blogger-escaped----------="" data-blogger-escaped-------="" data-blogger-escaped------="" data-blogger-escaped-----="" data-blogger-escaped-0.00savrdude:="" data-blogger-escaped-0="" data-blogger-escaped-0x00="" data-blogger-escaped-0x53="" data-blogger-escaped-0xff="" data-blogger-escaped-100="" data-blogger-escaped-1024="" data-blogger-escaped-1="" data-blogger-escaped-200="" data-blogger-escaped-25="" data-blogger-escaped-2="" data-blogger-escaped-32="" data-blogger-escaped-3="" data-blogger-escaped-4000="" data-blogger-escaped-4500="" data-blogger-escaped-4="" data-blogger-escaped-5="" data-blogger-escaped-64="" data-blogger-escaped-65="" data-blogger-escaped-6="" data-blogger-escaped-:="" data-blogger-escaped-accept="" data-blogger-escaped-ages="" data-blogger-escaped-and="" data-blogger-escaped-attiny13="" data-blogger-escaped-auto="" data-blogger-escaped-avr="" data-blogger-escaped-avrdude:="" data-blogger-escaped-because="" data-blogger-escaped-block="" data-blogger-escaped-bs2="" data-blogger-escaped-bytedelay="" data-blogger-escaped-calibration="" data-blogger-escaped-chip="" data-blogger-escaped-cmdexedelay="" data-blogger-escaped-dedicated="" data-blogger-escaped-delay="" data-blogger-escaped-description="" data-blogger-escaped-detail="" data-blogger-escaped-device="" data-blogger-escaped-disposition="" data-blogger-escaped-eeprom="" data-blogger-escaped-equals="" data-blogger-escaped-erase="" data-blogger-escaped-flash="" data-blogger-escaped-given="" data-blogger-escaped-hfuse="" data-blogger-escaped-http:="" data-blogger-escaped-indx="" data-blogger-escaped-initialized="" data-blogger-escaped-instructions="" data-blogger-escaped-lfuse="" data-blogger-escaped-lock="" data-blogger-escaped-maxw="" data-blogger-escaped-memory="" data-blogger-escaped-minw="" data-blogger-escaped-mode="" data-blogger-escaped-no="" data-blogger-escaped-null="" data-blogger-escaped-p00="" data-blogger-escaped-page="" data-blogger-escaped-paged="" data-blogger-escaped-pagel="" data-blogger-escaped-parallel="" data-blogger-escaped-part="" data-blogger-escaped-period="" data-blogger-escaped-poll="" data-blogger-escaped-polled="" data-blogger-escaped-pollindex="" data-blogger-escaped-pollvalue="" data-blogger-escaped-program="" data-blogger-escaped-programmer="" data-blogger-escaped-pulse="" data-blogger-escaped-readback="" data-blogger-escaped-reading="" data-blogger-escaped-ready="" data-blogger-escaped-reset="" data-blogger-escaped-retry="" data-blogger-escaped-sck="" data-blogger-escaped-serial="" data-blogger-escaped-set="" data-blogger-escaped-signature="" data-blogger-escaped-size="" data-blogger-escaped-stabdelay="" data-blogger-escaped-syncloops="" data-blogger-escaped-timeout="" data-blogger-escaped-to="" data-blogger-escaped-type="" data-blogger-escaped-us="" data-blogger-escaped-usbasp="" data-blogger-escaped-usbasp_cpi_cmd="" data-blogger-escaped-usbasp_initialize="" data-blogger-escaped-usbasp_program_enable="" data-blogger-escaped-usbasp_spi_set_sck_period="" data-blogger-escaped-www.fischl.de="" data-blogger-escaped-x30="" data-blogger-escaped-yes=""> 0x01, 0x31, 0x01, 0x01
avrdude: usbasp_cpi_cmd(0x30, 0x00, 0x01, 0x00) => 0x00, 0x31, 0x00, 0x01
Reading | #################                                  | 33% 0.00savrdude: usbasp_cpi_cmd(0x30, 0x00, 0x02, 0x00) => 0x00, 0x61, 0x00, 0x03
Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x010103
avrdude: Expected signature for ATtiny13 is 1E 90 07
         Double check chip, or use -F to override this check.
avrdude: usbasp_close()

avrdude done.  Thank you.

Nugrohos-MacBook-Air:coba3 nugroho$ 

Search the forums, its like the culprit is auto set sck on the new firmare. (http://openrcforums.com/forum/viewtopic.php?f=10&t=1363#p29615)

avrdude: auto set sck period (because given equals null)

got

Nugrohos-MacBook-Air:attiny13a nugroho$ avrdude -p m8 -c avrisp -b 19200 -P /dev/cu.wchusbserial1420 -U flash:w:main.hex -F
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.12s

avrdude: Device signature = 0x1e9307
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "main.hex"
avrdude: input file main.hex auto detected as Intel Hex
avrdude: writing flash (3758 bytes):

Writing | ################################################## | 100% 8.72s

avrdude: 3758 bytes of flash written
avrdude: verifying flash memory against main.hex:
avrdude: load data flash data from input file main.hex:
avrdude: input file main.hex auto detected as Intel Hex
avrdude: input file main.hex contains 3758 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 6.93s

avrdude: verifying ...
avrdude: 3758 bytes of flash verified

avrdude: safemode: Fuses OK (H:FF, E:D9, L:9F)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:attiny13a nugroho$ 

no
uh, I don’t want to be back to old locked firmware. The forum suggest that i have to jumper four resistor
curious
connect it to my arduino pro mini
and voila…

Nugrohos-MacBook-Air:attiny13a nugroho$ avrdude -p m328 -c usbasp -P usb -n   

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f
avrdude: Expected signature for ATmega328 is 1E 95 14
         Double check chip, or use -F to override this check.

avrdude done.  Thank you.
Nugrohos-MacBook-Air:attiny13a nugroho$ avrdude -p m328 -c usbasp -P usb -b 1920 -U flash:r:ArProMini.bin:r -v -F



avrdude: Version 6.0.1, compiled on Dec 16 2013 at 17:26:24

         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

         Copyright (c) 2007-2009 Joerg Wunsch



         System wide configuration file is "/usr/local/CrossPack-AVR-20131216/etc/avrdude.conf"

         User configuration file is "/Users/nugroho/.avrduderc"

         User configuration file does not exist or is not a regular file, skipping



         Using Port                    : usb

         Using Programmer              : usbasp

         Overriding Baud Rate          : 1920

         AVR Part                      : ATmega328

         Chip Erase delay              : 9000 us

         PAGEL                         : PD7

         BS2                           : PC2

         RESET disposition             : dedicated

         RETRY pulse                   : SCK

         serial program mode           : yes

         parallel program mode         : yes

         Timeout                       : 200

         StabDelay                     : 100

         CmdexeDelay                   : 25

         SyncLoops                     : 32

         ByteDelay                     : 0

         PollIndex                     : 3

         PollValue                     : 0x53

         Memory Detail                 :



                                  Block Poll               Page                       Polled

           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack

           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------

           eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff

           flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff

           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

           efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00

           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00

           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00



         Programmer Type : usbasp

         Description     : USBasp, http://www.fischl.de/usbasp/



avrdude: auto set sck period (because given equals null)

avrdude: AVR device initialized and ready to accept instructions



Reading | ################################################## | 100% 0.00s



avrdude: Device signature = 0x1e950f

avrdude: Expected signature for ATmega328 is 1E 95 14

avrdude: safemode: lfuse reads as FF

avrdude: safemode: hfuse reads as DA

avrdude: safemode: efuse reads as 5

avrdude: reading flash memory:



Reading | ################################################## | 100% 8.43s



avrdude: writing output file "ArProMini.bin"



avrdude: safemode: lfuse reads as FF

avrdude: safemode: hfuse reads as DA

avrdude: safemode: efuse reads as 5

avrdude: safemode: Fuses OK (H:05, E:DA, L:FF)



avrdude done.  Thank you.



Nugrohos-MacBook-Air:attiny13a nugroho$ ls -l

total 232

-rw-r--r--  1 nugroho  staff  32670 May 16 17:52 ArProMini.bin

drwxr-xr-x  8 nugroho  staff    272 May 15 21:50 blinkLED_A

drwxr-xr-x  8 nugroho  staff    272 May 16 00:30 coba1

drwxr-xr-x  8 nugroho  staff    272 May 15 21:50 coba2

drwxr-xr-x  8 nugroho  staff    272 May 16 09:16 coba3

-rw-r--r--@ 1 nugroho  staff  11182 May 16 13:29 firmware.hex

drwxr-xr-x  4 nugroho  staff    136 May 15 21:50 lcdNO

-rw-r--r--@ 1 nugroho  staff  10597 May 16 15:19 main.hex

-rw-r--r--  1 nugroho  staff   8192 May 16 15:27 original_firmware.bin

-rw-r--r--  1 nugroho  staff   8192 May 16 13:42 original_firmware.hex

-rw-r--r--  1 nugroho  staff  15784 May 11 23:23 tn13Adef.inc

-rw-r--r--@ 1 nugroho  staff  10785 Feb 28  2009 usbasp.atmega8.2009-02-28.hex

-rw-r--r--@ 1 nugroho  staff  13248 May 16 14:05 usbasp.atmega8.2011-05-28.hex

Nugrohos-MacBook-Air:attiny13a nugroho$ 

its very weird and then

ugrohos-MacBook-Air:coba3 nugroho$ avrdude -p t13 -c usbasp -P usb -n -F

avrdude: error: programm enable: target doesn't answer. 1 
avrdude: initialization failed, rc=-1
avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x000000 (retrying)
avrdude: Device signature = 0x000000 (retrying)
avrdude: Device signature = 0x000000
avrdude: Yikes!  Invalid device signature.
avrdude: Expected signature for ATtiny13 is 1E 90 07

avrdude done.  Thank you.

Nugrohos-MacBook-Air:coba3 nugroho$ 

sigh, my usbasp is ok
On the bright side: the update firmware warning is gone, using main.hex, a self compiled 2009 firmware
######
wait, ….
found another solution from http://forum.arduino.cc/index.php?topic=262150.0 and http://forum.arduino.cc/index.php?topic=282330.0

Nugrohos-MacBook-Air:coba3 nugroho$ avrdude -p t13 -c usbasp -B4 -n 

avrdude: set SCK frequency to 187500 Hz
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e9007

avrdude: safemode: Fuses OK (H:FF, E:FF, L:6A)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:coba3 nugroho$ 

Nugrohos-MacBook-Air:coba3 nugroho$ avrdude -p t13 -c usbasp -P usb -B4 -U flash:w:coba3.s.hex 

avrdude: set SCK frequency to 187500 Hz
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e9007
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: set SCK frequency to 187500 Hz
avrdude: reading input file "coba3.s.hex"
avrdude: input file coba3.s.hex auto detected as Intel Hex
avrdude: writing flash (34 bytes):

Writing | ################################################## | 100% 0.04s

avrdude: 34 bytes of flash written
avrdude: verifying flash memory against coba3.s.hex:
avrdude: load data flash data from input file coba3.s.hex:
avrdude: input file coba3.s.hex auto detected as Intel Hex
avrdude: input file coba3.s.hex contains 34 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.02s

avrdude: verifying ...
avrdude: 34 bytes of flash verified

avrdude: safemode: Fuses OK (H:FF, E:FF, L:6A)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:coba3 nugroho$ 

.

the coba.s is PB0, PB1, PB2 is connected to LED each. PB0 and PB is always on whilst PB2 blink every 1s.

.include "../tn13Adef.inc"

.org 0                         

init:

    ldi r16,0b00000111         

    out DDRB,r16                ; PB2 as output

    sbi PORTB,1

    sbi PORTB,0

loop:

    sbi PORTB,2                 

    rcall timer                 

    cbi PORTB,2                 

    rcall timer                

    rjmp loop

timer:

    ldi r16,0                   ; these are timer counters

    ldi r17,0

    ldi r18,5

timer2:

    inc r16                     ; do 256 iterations

    brne timer2

    inc r17                     ; do 256 times

    brne timer2

    dec r18

    brne timer2                 ; do 5 times

    ret                         ; return

for me it’s enough for this day,

.

.

.

Actually, not enough (still want to fiddling with the Tiny :p )

Tengkulak

  

Pagi ini. 

Bangun Tidur. 

Lapar. 

Ups, harus masak sendiri, Alfa Beta dan istri sedang liburan. 

Matikan rice cooker/warmer, buang sisa nasi yang hampir kering karena lupa sebelum tidur gak kucabut stop kontaknya. Cuci wadah beras, tambahkan beras, beres. 

Eit, jangan lupa pasang saklar di posisi cook, nah itu dia, led berwarna orange. 

Sambil nunggu nasi  matang, bikin lauk dulu. 

Kulkas kosong, ehm

Sudah lama tak bersepeda pancal. Turun ke pasar kaget di daerah pabrik bawah sana sekitar tiga kilo. 

Di tengah jalan barus sadar. Salah strategi, karena nanti baliknya harus mengayuh di jalan NAIK dalam keadaan lapar DAN bawa belanjaan.

Kesalahan kedua, hari ini tanggal merah, pabrik libur, dan banyak yang tidak jualan, walah, padahal sudah berencana ke stand mbak cantik penjual ayam yang di depan pabrik rokok Gandum itu.

Syukur masih ada dua penjual sayur yang buka, memang rumah mereka di situ sepertinya.

Ku berhenti di paling ujung, yang paling sepi, malas antri, heheh…

“Napa mas?”

“Cambah niki sak kresek pintenan bu?” 

“Wolu setengah mas”

“Nggih pun, kalih tigan sak kilo”

“Napa malih?” sambil ambil telur pre-scaled satu kilo, :) .

“Lek lombok pintenan bu?”

“Lha tumbas pinten? Sewu? Rong ewu? Seprapat?"

“Kalih ewu mawon"

“Nggih “ sambil ambil cabe, dimasukkan ke tas kresek kecil. "Sak niki napa-napa mundhak mas"

Sambil nunggu ibu penjual sayur “ngadahi” cabe, mata saya men-sweeping jualannya. Ada pare yang biasanya langsung kubeli tapi sedang tidak mood tok makan pahit, tempe, kemarin yang kubeli sepulang ngampus bareng tahu belum sempat kugoreng, bawang merah ….

“Brambang niki pinten bu? “

“Sing ageng napa alit? niku nem setengah, sing alit nem ewu"

“Ingkang ageng lek ngoten, cek gampang ngonceki, heheh…” si ibu juga ikut tertawa

“Wah, ngoten tah, lha mesisan sing oncekan mawon mas, nemsetengah tapi alit”

“Wonten tah? Nggih pun, sing oncekan mawon”

“Heheh…"

...

“Napa malih?”

“Sampun”

Setelah beberapa saat ngitung

“Tigangdasa kalih mas, wis tigang dasa mawon”

“Wah, suwun bu” sambil ambil dompet, kuulurkan lima puluh ribu

“Sadeyan to mas? “ Tanya si ibu penjual sambil tangannya merogoh laci mencari-cari kembalian.

“Walah mboten, niki teng griya lagi sepi. Liburan teng mbahe sedaya”

“Oalah, teng pundi?” tanya si ibu sambil mengulurkan sepuluh ribuan dua

“Kediri bu, suwun”

“Nggih, suwun"

Rupanya porsi belanjaanku sama dengan porsi kulakan tukang sayur, :)

Blinking LED in ATtiny13A in Assembler

After read the ATtiny13A datasheet, I use the code below as the base. Under OS X in my Macbook Air. Using USBASP programmer. 

.include "../tn13Adef.inc"

;Pin assignments

;.equ LED = PB0 ;pin 5 of ATtiny13

.cseg

.org 0x00

rjmp setup

setup:

;CONFIGURE I/O PINS

ldi r16, (1 << PB0)

out PORTB, r16

out DDRB, r16

loop:

rjmp loop

Compile, build and upload it

Last login: Wed May 13 22:50:32 on ttys000

Nugrohos-MacBook-Air:~ nugroho$ avrdude -p t13 -P usb -c usbasp -n

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e9007

avrdude: safemode: Fuses OK (H:FF, E:FF, L:6A)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:~ nugroho$ 


Nugrohos-MacBook-Air:coba1 nugroho$ avrdude -p t13 -c usbasp -P usb -U flash:w:coba.hex 

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e9007
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file "coba.hex"
avrdude: input file coba.hex auto detected as Intel Hex
avrdude: writing flash (10 bytes):

Writing | ################################################## | 100% 0.03s

avrdude: 10 bytes of flash written
avrdude: verifying flash memory against coba.hex:
avrdude: load data flash data from input file coba.hex:
avrdude: input file coba.hex auto detected as Intel Hex
avrdude: input file coba.hex contains 10 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.02s

avrdude: verifying ...
avrdude: 10 bytes of flash verified

avrdude: safemode: Fuses OK (H:FF, E:FF, L:6A)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:coba1 nugroho$ 

Trying to get slightly advanced template 

.nolist

.include "../tn13Adef.inc"

.list

;.def rmp = r16

.dseg

.org 0x0060

.cseg

.org $0000

rjmp main;reset vector

reti;int vector 1

reti;int vector2

reti;...

reti

reti

reti

reti

reti

reti

main:

;init stack

ldi r16, low(ramend)

out spl, r16

;init portb

ldi r16,(1<<ddb2)|(1<<ddb1)|(1<<ddb0)

out ddrb, r16

;rutin

ldi r16, 1<<SE;enable sleep

out mcucr, r16

sei

loop:

sleep;goto sleep

nop;dummy wakeup

rjmp loop

compile, build and upload it

Nugrohos-MacBook-Air:coba2 nugroho$ ls
template.s  template.s.eep.hex template.s.obj
template.s.cof  template.s.hex
Nugrohos-MacBook-Air:coba2 nugroho$ avra -o template.hex template.s
AVRA: advanced AVR macro assembler Version 1.3.0 Build 1 (8 May 2010)
Copyright (C) 1998-2010. Check out README file for more info

   AVRA is an open source assembler for Atmel AVR microcontroller family
   It can be used as a replacement of 'AVRASM32.EXE' the original assembler
   shipped with AVR Studio. We do not guarantee full compatibility for avra.

   AVRA comes with NO WARRANTY, to the extent permitted by law.
   You may redistribute copies of avra under the terms
   of the GNU General Public License.
   For more information about these matters, see the files named COPYING.

Pass 1...
Pass 2...
done

Used memory blocks:
   Code      :  Start = 0x0000, End = 0x0013, Length = 0x0014

Assembly complete with no errors.
Segment usage:
   Code      :        20 words (40 bytes)
   Data      :         0 bytes
   EEPROM    :         0 bytes
Nugrohos-MacBook-Air:coba2 nugroho$ ls
template.s  template.s.eep.hex template.s.obj
template.s.cof  template.s.hex

Nugrohos-MacBook-Air:coba2 nugroho$ avrdude -p t13 -c usbasp -P usb -U flash:w:template.s.hex

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e9007
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file "template.s.hex"
avrdude: input file template.s.hex auto detected as Intel Hex
avrdude: writing flash (40 bytes):

Writing | ################################################## | 100% 0.05s

avrdude: 40 bytes of flash written
avrdude: verifying flash memory against template.s.hex:
avrdude: load data flash data from input file template.s.hex:
avrdude: input file template.s.hex auto detected as Intel Hex
avrdude: input file template.s.hex contains 40 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.03s

avrdude: verifying ...
avrdude: 40 bytes of flash verified

avrdude: safemode: Fuses OK (H:FF, E:FF, L:6A)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:coba2 nugroho$

.

Two codes above have no loop feature, the first code just turning LED connected to PortB0 on. No blink. The second turning LED on on PB0 PB1 and PB2

Try to update the first code to turning on LED connected to PB0, PB1 and PB2

.include "../tn13Adef.inc"

;Pin assignments

;.equ LED = PB0 ;pin 5 of ATtiny13

.cseg

.org 0x00

rjmp setup

setup:

;CONFIGURE I/O PINS

ldi r16, (1 << PB0)|(1 << PB1)|(1<<PB2)

out PORTB, r16

out DDRB, r16

loop:

rjmp loop

and try to disassembly it 

Nugrohos-MacBook-Air:coba1 nugroho$ vavrdisasm coba.s.hex 
   0: c0 00       rjmp .+0 ; 0x2
   2: e0 07       ldi R16, 0x07
   4: bb 08       out $18, R16
   6: bb 07       out $17, R16
   8: cf ff       rjmp .-2 ; 0x8
Nugrohos-MacBook-Air:coba1 nugroho$ 

.

very pretty, :)

Now, how about blinking it?

Just add timer subroutine

.include "../tn13Adef.inc"

;Pin assignments

;.equ LED = PB0 ;pin 5 of ATtiny13

.cseg

.org 0x00

rjmp setup

setup:

;CONFIGURE I/O PINS

ldi r16, (1 << PB0)|(1 << PB1)|(1<<PB2)

out PORTB, r16

out DDRB, r16

loop:

    sbis PORTB,0

    rjmp ledOn

    rjmp ledOff

    

    rally:

    rcall timer

    rjmp loop

timer:

    ldi r17,0x00

    testtimer:

        cpi r17,0xf0

        brsh endtimer   ;branch if same or higher

        ldi r18,0x00

        testtimer2:

            cpi r18,0xf0

            brsh endtimer2 

            inc r18

            rjmp testtimer2

        endtimer2:

        inc r17

        rjmp testtimer

    endtimer:

ret

    

ledOn:

    sbi PORTB,0

    rjmp rally

ledOff:

    cbi PORTB,0

    rjmp rally

compile, build, disassembly it (it’s not necessary; just for fun :) ), and then upload it

Nugrohos-MacBook-Air:coba1 nugroho$ avra -o coba.hex coba.s
AVRA: advanced AVR macro assembler Version 1.3.0 Build 1 (8 May 2010)
Copyright (C) 1998-2010. Check out README file for more info

   AVRA is an open source assembler for Atmel AVR microcontroller family
   It can be used as a replacement of 'AVRASM32.EXE' the original assembler
   shipped with AVR Studio. We do not guarantee full compatibility for avra.

   AVRA comes with NO WARRANTY, to the extent permitted by law.
   You may redistribute copies of avra under the terms
   of the GNU General Public License.
   For more information about these matters, see the files named COPYING.

Pass 1...
Pass 2...
done

Used memory blocks:
   Code      :  Start = 0x0000, End = 0x000B, Length = 0x000C

Assembly complete with no errors.
Segment usage:
   Code      :        12 words (24 bytes)
   Data      :         0 bytes
   EEPROM    :         0 bytes
Nugrohos-MacBook-Air:coba1 nugroho$ vavrdisasm coba.s.hex 
   0: c0 00       rjmp .+0 ; 0x2
   2: e0 07       ldi R16, 0x07
   4: bb 08       out $18, R16
   6: bb 07       out $17, R16
   8: d0 01       rcall .+2 ; 0xc
   a: cf fe       rjmp .-4 ; 0x8
   c: e0 10       ldi R17, 0x00
   e: 3f 10       cpi R17, 0xf0
  10: f4 10       brcc .+4 ; 0x16
  12: 95 13       inc R17
  14: cf fc       rjmp .-8 ; 0xe
  16: 95 08       ret 
Nugrohos-MacBook-Air:coba1 nugroho$ avrdude -p t13 -c usbasp -P usb -U flash:w:coba.s.hex

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e9007
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file "coba.s.hex"
avrdude: input file coba.s.hex auto detected as Intel Hex
avrdude: writing flash (24 bytes):

Writing | ################################################## | 100% 0.03s

avrdude: 24 bytes of flash written
avrdude: verifying flash memory against coba.s.hex:
avrdude: load data flash data from input file coba.s.hex:
avrdude: input file coba.s.hex auto detected as Intel Hex
avrdude: input file coba.s.hex contains 24 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.02s

avrdude: verifying ...
avrdude: 24 bytes of flash verified

avrdude: safemode: Fuses OK (H:FF, E:FF, L:6A)

avrdude done.  Thank you.

Nugrohos-MacBook-Air:coba1 nugroho$ 

The timer's maybe little weird, just my approach to delay by make r17 and r18 to count several time. The code below is tidier timer, :)

.include "../tn13Adef.inc"

.org 0                         

init:

    ldi r16,0b00000100         

    out DDRB,r16                ; PB2 as output

loop:

    sbi PORTB,2                 

    rcall timer                 

    cbi PORTB,2                 

    rcall timer                

    rjmp loop

timer:

    ldi r16,0                   ; these are timer counters

    ldi r17,0

    ldi r18,5

timer2:

    inc r16                     ; do 256 iterations

    brne timer2

    inc r17                     ; do 256 times

    brne timer2

    dec r18

    brne timer2                 ; do 5 times

    ret                         ; return

I love assembler, :)

Kode pertama di atas digunakan untuk menyalakan LED di PortB,0 di ATTiny13A. Kode kedua digunakan untuk menyalakan LED di Pin B0, B1 dan B2.

Kode ketiga menggunakan pola/gaya yang sama dengan kode pertama namun yang dinyalakan kali ini adalah LED di Pin B0, B1 dan B2

Ketiga kode di atas hanya digunakan untuk menyalakan LED sekali saja dan terus menyala, memang ada loop tapi loop tersebut tidak melakukan apapun. 

Untuk membuat led berkedip dalam selang waktu tertentu, kita tambahkan subrutin yang bertindak sebagai time. Bagi saya  agak rumit untuk membuat timer di assembler. Saya belum bisa menggunakan model interrupt, sehingga  saya pakai model loop dengan menyuruh r17 dan r18 berhitung dari 0 sampai f0. Juga tambahkan toggle agar jika led nyala maka dia mati dan sebaliknya

My Lovely Asti

 Hari ini dia sangat pengertian, menggemboskan ban belakang kiri di garasi, pagi hari, saat akan mengantar Alfa Beta dan ibuknya ke Kediri. Memang sempat ngedumel “duh, ngapain sih rodamu pake kempes segala”. Tapi bersyukur juga. Bayangkan jika dia memutuskan ntuk membocorkan roda di jalur antara Malang-Kediri, jalur yang terkenal macet saat libur. 

Jadilah paksa dia keluar garasi karena memang sempit, Alfa sempat heboh minta naik, dikira sudah mau berangkat. Saat tahu kalo si Asti pincang dia malah kegirangan “ loh, mobil merah-nya gembos ayah, …” trus lari masuk rumah tuk laporan ibuknya yang sedang mandikan Beta.

Sementara pake ban serep dulu deh, buka bagasi, keluarkan ban serep dan “Ouch…”, kena salah satu kawat yang mencuat  dar salah satu sudutnya, yeah, namanya juga ban cadangan, :)

Masalah baru, ban serepnya juga empes, walah….

Ya sudahlah, pompa dulu ke tukang ban, dekat jalan masuk perumahan, balik lagi ke TKP, keluarkan dongkrak buaya (yang jembatan sudah bengkok, tapi itu cerita tuk lain waktu), dan sepuluh menit kemudian ban serep sudah terpasang manis di kaki belakang kiri si Asti.

Dengan tangan cenat-cenut berdenyut saya mikir juga, dengan ban serrep yang kawatnya sudah pada keluar gini apa ya aman. Akhirnya ban utama yang kempis kubawa ke tambal ban dengan asumsi ben serep tidak bakal kuat ke kediri. Kalau kuat ya syukur, kalau enggak setiadaknya ban yang di bagasi ndak kempis tetapi gak diganti sekarang, belum sarapan. Dan Alfa minta mandi sama ayah.

So, setelah nyemplungkan Alfa ke bak, disabuni, bilas.sikat gigi, kasih dia dua mainan mobil hot wheel favoritya, saya ngangkut ban lagi ke tambal ban; Alfa bisa main air di bak berjam-jam sampai airnya dingin dan dia kering tanpa pakai handuk.

Sambil mengunyah roti, sampingan dari belanja sayur istri di Pak Bud, berangkatlah saya naik si ducati (ehm, bebek, suzuki smash, dulu punya sticker ducati :) )  sambil nenteng roda.

Selang tiga puluh menit memang tidak lama, tetapi jika sedang mengalami hari yang eksotis, menit atau detik bisa sangat menentukan. Seperti saya, sesampai di tukang tambal ban ternyata sudah ada truk besar yang nongkrong di situ, di bak truknya terdapat empat ban truk baru yang saat itu sedang diturunkan sama pemilik truk. Dua sudah turun; salah satunya sedang di’oprek’ oleh tukang tambal ban. Empat ban belakang truk sudah dilepas satu sudah lepas dari velgnya, sedang diganti dengan yang baru. :s

Ngantri nih,

Kuhitung waktu tuk mengganti satu roda, roda pertama tak valid karena saya datang saat di pertengahan proses penggantian dan itu memakan waktu sepuluh menit, tambah sepuluh menit lagi tuk memompa angin ke ban tapi tak usah dihitung karena saat mompa gak perlu ditunggui. Roda kedua memerlukan waktu setengah jam, waduh. Kutinggal saja.

Yeah, memang acara keberangkatan jadi molor satu jam, jalan sudah ramai, tapi untung tak terlalu macet, dan sampai Kediri dalam waktu 3 jam, tak buruk tuk sedan produksi tahun 90.

Tetapi bagi saya poin pentingnya adalah, si Asti bermasalah saat di rumah. Bisa diatasi sambil makan minum, Alfa Beta bisa main di rumah, tidak di jok mobil berjam-jam kepanasan seperti jika terjadi di jalan. 

Memang tidak menyenangkan saat Asti bermasalah seperti itu, tetapi hari ini saya bersyukur karena dia sedang baik hati.

Sedang baik hati? Yeah, dia sedang baik hati hari ini. 

Memang pernah tidak baik hati? Heheh, … Saat dia bad mood, waduh,… Saya pernah sendirian ganti master kopling bawah di hutan daerah Ngawi, malam-malam.

Pernah juga v-belt mau putus di daerah Pakem Jogja. 

….

Dia Mazda Astina tahun 90. Di rumah kami memanggilnya Si Merah, karena warnanya merah (tentu saja :) ).

Dapat dalam kondisi lumayan amburadul dengan perkabelan yang sudah tidak standar. Sisi terangnya adalah, dengan keadaan seperti itu saya bisa bebas modif dia tanpa taku merusak orisinalitasnya, toh sudah tidak orisinal semuanya, kecuali lampu popup genitnya. 

Di dunia maya dia kupanggil Asti, kependekan dari Astina BP, yeah karena dia memang Mazda Astina dan bermesin BP. Namun BP disini adalah singkatan dari Baret dan Penyok, hihihi. Di hari kedua setelah saya beli, dia mendapatkan goresan dalam di sisi kanan, sepertinya digores dengan koin oleh seseorang saat dia parkir di depan rumah dan saya tinggal ke kampus.  Tiga goresan dalam memanjang dari depan ke belakang dan dua atau tiga goresan di grill depan plus satu “tanda tangan” dengan koin. Jadilah B(aret)

Saat mencoba ganti ban, baru pertama ganti, baru punya mobil. Saya lupa, eh, memang tidak tahu bahwa roda harus diganjal dengan sesuatu. Saya hanya mengandalkan rem tangan. Dan jadilah si Asti bergerak ke samping, menghantam pagar semen dan tugu gerbang pagar depan rumah sampai roboh. Meninggalkan penyok di sisi kiri pintu depan Asti. Jadilah P(enyok).

Yang menyenangkan dari si Asti adalah mood jeleknya sepertinya memiliki kontrol, dia hanya bermasalah tentang hal-hal yang bisa saya atasi, seberat apapun. Jadi selama ini dia gak pernah mogok sampai menginap di jalan.

Juga dia seperti tahu kalo saya sedang tidak ingin dia mogok saat seperti ketika kesasar dan dipaksa menyusuri jalur pantai selatan Pacitan-Trenggalek saat mencari jalur alternatif dari Jogja ke Malang.

Pernah juga dengan niat yang sama ahirnya dipaksa menembus jalur Munjungan, Sawoo, menembus pegunungan.

Dan pada arah sebaliknya Malang-Jogja, tersesat dan terpaksa menyusuri daerah TegalGondo, jalur tepi sungai yang mengarah ke laut panti selatan Pacitan.

Belum terhitung saat mencari jalan dan terseseat di daerah Pracimantoro, juga daerah Wonogiri.

Jalur-jalur tersebut sangat sepi, kebanyakan terdiri dari hutan alami. Nah, pada saat-saat seperti ini si Asti dapat diandalkan. Yeah, walaupun saya tidak mau menempuh jalur itu lagi. 

Disassembler

 vAVRdisasm is an 8-bit Atmel AVR firmware disassembler. 

According to its site, this single-pass disassembler can read Atmel Generic, Intel HEX8, and Motorola S-Record formatted files containing valid AVR program binaries.

I compile it without problem on my Macbook Air running OS X Yosemite. Simply by typing 

make

and there it is, the binary is created. Copied it to my /usr/local/bin (or whatever you want, copy it to Desktop, or even use it as is in the download folder, in its source directory )

Last login: Mon May 11 11:12:14 on ttys000

Nugrohos-MacBook-Air:~ nugroho$ cd Downloads/

Nugrohos-MacBook-Air:Downloads nugroho$ cd vavrdisasm-master/

Nugrohos-MacBook-Air:vavrdisasm-master nugroho$ ls

COPYING crazy_test.py print_stream.c

ChangeLog.md disasm_stream.h print_stream.h

Makefile file stream_error.h

README.md instruction.h vavrdisasm.sln

avr lsupp vavrdisasm.vcproj

byte_stream.h main.c

Nugrohos-MacBook-Air:vavrdisasm-master nugroho$ less README.md 

Nugrohos-MacBook-Air:vavrdisasm-master nugroho$ make

gcc -Wall -O3 -D_GNU_SOURCE -I. -c file/libGIS-1.0.5/atmel_generic.c -o build/file/libGIS-1.0.5/atmel_generic.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c file/libGIS-1.0.5/ihex.c -o build/file/libGIS-1.0.5/ihex.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c file/libGIS-1.0.5/srecord.c -o build/file/libGIS-1.0.5/srecord.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c file/atmel_generic.c -o build/file/atmel_generic.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c file/ihex.c -o build/file/ihex.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c file/srecord.c -o build/file/srecord.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c file/binary.c -o build/file/binary.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c file/debug.c -o build/file/debug.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c file/test.c -o build/file/test.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c file/asciihex.c -o build/file/asciihex.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c avr/avr_instruction_set.c -o build/avr/avr_instruction_set.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c avr/avr_disasm.c -o build/avr/avr_disasm.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c avr/avr_print.c -o build/avr/avr_print.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c print_stream.c -o build/print_stream.o

gcc -Wall -O3 -D_GNU_SOURCE -I. -c main.c -o build/main.o

gcc  build/file/libGIS-1.0.5/atmel_generic.o build/file/libGIS-1.0.5/ihex.o build/file/libGIS-1.0.5/srecord.o build/file/atmel_generic.o build/file/ihex.o build/file/srecord.o build/file/binary.o build/file/debug.o build/file/test.o build/file/asciihex.o build/avr/avr_instruction_set.o build/avr/avr_disasm.o build/avr/avr_print.o build/print_stream.o build/main.o -o vavrdisasm

Nugrohos-MacBook-Air:vavrdisasm-master nugroho$ ls

COPYING crazy_test.py print_stream.h

ChangeLog.md disasm_stream.h stream_error.h

Makefile file vavrdisasm

README.md instruction.h vavrdisasm.sln

avr lsupp vavrdisasm.vcproj

build main.c

byte_stream.h print_stream.c

Nugrohos-MacBook-Air:vavrdisasm-master nugroho$ ./vavrdisasm

Usage: ./vavrdisasm [options] 

Disassembles program file . Use - for standard input.



vAVRdisasm version 3.1 - 09/18/2014.

Vanya A. Sergeev - 

https://github.com/vsergeev/vavrdisasm



Options:

  -o, --out-file          Write to file instead of standard output.



  -t, --file-type         Specify file type of the program file.



  --assembly                    Produce assemble-able code with address labels.



  --data-base-hex               Represent data constants in hexadecimal

                                  (default).

  --data-base-bin               Represent data constants in binary.

  --data-base-dec               Represent data constants in decimal.



  --no-addresses                Do not display address alongside disassembly.

  --no-opcodes                  Do not display original opcode alongside

                                  disassembly.

  --no-destination-comments     Do not display destination address comments

                                  of relative branch/jump/call instructions.

  --objdump                     Create avr-objdump compatible output.

                                  Affects address display.



  -h, --help                    Display this usage/help.

  -v, --version                 Display the program's version.



Supported file types:

  Atmel Generic             generic

  Intel HEX8                ihex

  Motorola S-Record         srec

  Raw Binary                binary

  ASCII Hex                 ascii



Nugrohos-MacBook-Air:vavrdisasm-master nugroho$ cp vavrdisasm /usr/local/bin/

cp: /usr/local/bin/vavrdisasm: Permission denied

Nugrohos-MacBook-Air:vavrdisasm-master nugroho$ sudo cp vavrdisasm /usr/local/bin/

Password:

Nugrohos-MacBook-Air:vavrdisasm-master nugroho$ vavrdisasm 

Here vAvrDisasm in action

Nugrohos-MacBook-Air:ATTiny13A nugroho$ cd 
Nugrohos-MacBook-Air:~ nugroho$ cd Desktop/mikrocontroller/ATTiny/ATTiny13A/
Nugrohos-MacBook-Air:ATTiny13A nugroho$ ls
coba.cof coba.eep.hex coba.hex coba.obj coba.s  tn13Adef.inc
Nugrohos-MacBook-Air:ATTiny13A nugroho$ vavrdisasm coba.hex 
   0: c0 00       rjmp .+0 ; 0x2
   2: e0 01       ldi R16, 0x01
   4: bb 08       out $18, R16
   6: bb 07       out $17, R16
   8: cf ff       rjmp .-2 ; 0x8
Nugrohos-MacBook-Air:ATTiny13A nugroho$ 

.