hmm, its too late

Selamat jadi CPNS di UNDANA Kupang, Penny...

The Journal:
1. Asrama Putri Bone (Uni, Pram, Arif, Finta, Verra, Hijrah)
2. 7 Sup Konro, 2 Iga Bakar, 2 Jus Avokad Kopi, 2 Jus Avokad, ¹Es Teh, ¹Es Jeruk, ¹Jus Wortel, ¹Jus Pisang, ¹Jus Mangga (Uni, Pram, Arif , Finta, Verra, Hijrah, Ellida, Immel, Wahyu)
3. Ramai Mall Malioboro (Uni, Pram, Verra, Hijrah, si kembar ketinggalan)
4. Post Mode Gejayan (Uni, Pram, Verra, Hijrah, si kembar ketinggalan)
5. Asrama Putri Bone (Uni, Pram, Verra, Hijrah, si kembar akhirnya bisa menyusul, plus Kak Aras plus Mardia)
6. Di kost, tidur, sendiri...

Using Telkomsel Flash, W960i and OpenSuSE Linux

Attach your w960i to computer, make sure it is in "normal mode"

create file wvdial-flash.config in folder /etc (you must be login as root, or at least copy to /etc folder as root)

[Dialer Defaults]
Modem=/dev/ttyACM1
Baud=115200
Init1=ATZ
Init2=ATQ0 V¹E¹S0=0 &C¹&D2
Init3=
Phone=*99#
Username=internet
Ask Password=0
Dial Command=ATDT
Stupid Mode=1
Compuserve=0
Force Address
Idle Seconds=0
Dial Message1=
Dial Message2=
ISDN=0
Auto DNS=1


using wvdial (as root):
#wvdial --config /etc/wvdial-flash.config

if you got error, try to play 2nd line e.g Modem=/dev/ttyACM2 (it sometimes occur when i detach the phone and attach it again)

Enjoy.

The Answer of My Introduction Mathemathical for Physicist (Jawaban ujian Fismatku)

I use fortran to generate x n y position:

below is the code

PROGRAM Grafik
IMPLICIT NONE
REAL :: gaya,ygaya,k,ky,a,ay,m,v,vy,t,x,y,z
REAL :: sbx,sby,sbz,g,fx,fy,fz
REAL :: r,dt,dx,dy,dz,dv,dvy,theta,phi
INTEGER :: i,j,n
r =100
g =10
n =50
k =10000
ky =1000
t=0
dt=0.001
OPEN (80, FILE = 'data.dat', STATUS = 'NEW', FORM = 'FORMATTED')
WRITE(80,*) ' i t x y'
CLOSE(80)
OPEN(80, ACCESS = 'APPEND', FILE = 'data.dat', FORM = 'FORMATTED')
DO i=-n,n
x=i
x=x/10
IF (x .NE. 1) THEN
!y=(2+x-x*x)/(x-1)/(x-1)
z=2-x-x*x
vy=(x-1)*(x-1)
y=z/vy
END IF
WRITE(80,81) x,y
8¹FORMAT(e14.7,' ',e14.7)
END DO
CLOSE(80)
END PROGRAM Grafik

compile using:

$gfortran grafik.f90

that syntax has output a.out
run using:

$./a.out

It'll create file named data.dat and generate number of f(x)=(2-x-x^2)/(x-1)^2

plot using kst :
$kst -x ¹-y 2 data.dat

It means kst will plot a graph using 1st column as x-axis and 2nd column as y-axis of data.dat

to simplify that procedure, I create text file named run.sh contain:

rm *.dat
gfortran grafik.f90
./a.out
kst -x ¹-y 2 data.dat

make run.sh executable
then run:
$./run.sh



.........dan mereka hidup bahagia berdua selamanya.

Hiks! Hore...

Benar-benar dikerjain Penguin sepagian,

uh 3 jam yang menyebalkan

Selamat bu Yus (hehe)

Hore

Finally, I'm able to conquer Telkomsel Flash+W960i+OpenSuSE10.3

Telkomsel Flash

Trying telkomsel Flash on my OpenSuSE 10.3

not successfull yet