Nugroho's blog.

Thursday, September 1, 2016

Motivasi.

Ndak usah dipaksa maju jika tujuannya ada dibelakang.

Wednesday, August 31, 2016

Dalai Lama's Quote.

If you think you are too small to make a difference, try sleeping with a mosquito.

Tuesday, August 30, 2016

Pulang dari Kampus.


Alfa: Ayah, tadi jatuh pas naik sepeda gajah, berdarah. Ndak mandi, nanti perih.

(Sambil menunjukkan jempol kaki yang kulitnya terkelupas)

:)

Kangen.

Kinanthi: Lama nggak ngobrol ya Meg.

Meg: Iya Kin, lha sekarang semua sibuk ngurusi Mukidi.

K: (senyum)

Friday, August 19, 2016

Transmit serial data to an Android device, :)


.(Independent multitasking LEDs blink using Arduino FreeRTOS, and send the data wirelessly using bluetooth module HC-05. :) )



http://ift.tt/2b4YNBe.

the code is same as here

Independent Wireless Multitasking LEDs blink using Arduino FreeRTOS



and send the data wirelessly using bluetooth module HC-05. :)



http://ift.tt/2bi4MpP.
The code
#include <Arduino_FreeRTOS.h>
#include <SoftwareSerial.h>
SoftwareSerial mySerial(10, 11); // RX, TX

int n = 0;

// define two tasks for Blink & AnalogRead
void TaskBlink( void *pvParameters );
void TaskBlink2( void *pvParameters );
void TaskBlink3( void *pvParameters );
void TaskBlink4( void *pvParameters );
void TaskTadaa( void *pvParameters );

// the setup function runs once when you press reset or power the board
void setup() {
   // initialize serial communication at 9600 bits per second:
  mySerial.begin(9600);  

  // Now set up two tasks to run independently.
  xTaskCreate(
    TaskBlink
    ,  (const portCHAR *)"Blink"   // A name just for humans
    ,  128  // Stack size
    ,  NULL
    ,  2  // priority
    ,  NULL );
  xTaskCreate(TaskBlink2,(const portCHAR *)"Blink2",128, NULL,2,NULL );
  xTaskCreate(TaskBlink3,(const portCHAR *)"Blink3",128, NULL,2,NULL );
  xTaskCreate(TaskBlink4,(const portCHAR *)"Blink4",128, NULL,2,NULL );

  xTaskCreate(
    TaskTadaa
    ,  (const portCHAR *) "Tadaa"
    ,  128 // This stack size can be checked & adjusted by reading Highwater
    ,  NULL
    ,  1  // priority
    ,  NULL );

  // Now the task scheduler, which takes over control of scheduling individual tasks, is automatically started.
}

void loop()
{
  // Empty. Things are done in Tasks.
}

/*--------------------------------------------------*/
/*---------------------- Tasks ---------------------*/
/*--------------------------------------------------*/

void TaskBlink(void *pvParameters)  // This is a task.
{
  (void) pvParameters;

  // initialize digital pin 13 as an output.
  pinMode(13, OUTPUT);

  for (;;) // A Task shall never return or exit.
  {
    digitalWrite(13, HIGH);   // turn the LED on (HIGH is the voltage level)
    mySerial.println("LED 13 Nyala");
    vTaskDelay( 1000 / portTICK_PERIOD_MS ); // wait for one second
    digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW
    mySerial.println("LED 13 Padam");
    vTaskDelay( 1000 / portTICK_PERIOD_MS ); // wait for one second
  }
}
void TaskBlink2(void *pvParameters){
  (void) pvParameters;
  pinMode(2, OUTPUT);
  for (;;) {
    digitalWrite(2, HIGH); vTaskDelay( 2000 / portTICK_PERIOD_MS );mySerial.println("LED 2 Nyala");
    digitalWrite(2, LOW);  vTaskDelay( 2000 / portTICK_PERIOD_MS );mySerial.println("LED 2 Padam"); 
  }
}

void TaskBlink3(void *pvParameters){
  (void) pvParameters;
  pinMode(3, OUTPUT);
  for (;;) {
    digitalWrite(3, HIGH); vTaskDelay( 500 / portTICK_PERIOD_MS );mySerial.println("LED 3 Nyala");
    digitalWrite(3, LOW);  vTaskDelay( 1500 / portTICK_PERIOD_MS );mySerial.println("LED 3 Padam"); 
  }
}

void TaskBlink4(void *pvParameters){
  (void) pvParameters;
  pinMode(4, OUTPUT);
  for (;;) {
    digitalWrite(4, HIGH); vTaskDelay( 500 / portTICK_PERIOD_MS );mySerial.println("LED 4 Nyala");
    digitalWrite(4, LOW);  vTaskDelay( 250 / portTICK_PERIOD_MS );mySerial.println("LED 4 Padam"); 
  }
}

void TaskTadaa(void *pvParameters)  // This is a task.
{
  (void) pvParameters;
  for (;;)
  {
    // read the input on analog pin 0:
    n++;
    if (n>100){n = 0;}
    // print out the value you read:
    mySerial.print("Tadaa...");
    mySerial.println(n);
    vTaskDelay(2000/portTICK_PERIOD_MS);// 2 second delay
    // one tick delay (15ms) in between reads for stability
  }
}

Thursday, August 18, 2016

Independent LEDs Blinking



 using Arduino FreeRTOS, realtime multi tasking, :)

 I programmed LED on pin 2, 3, 4 and 13 to blink at its own time. The advantage of this Arduino FreeRTOS is we don't have to calculate the timing of each pin in respect of sequential execution. It's has its own task and schedule, independent of each other.



http://ift.tt/2b4jwFJ.


#include <Arduino_FreeRTOS.h>
int n = 0;

// define two tasks for Blink & AnalogRead
void TaskBlink( void *pvParameters );
void TaskBlink2( void *pvParameters );
void TaskBlink3( void *pvParameters );
void TaskBlink4( void *pvParameters );
void TaskTadaa( void *pvParameters );

// the setup function runs once when you press reset or power the board
void setup() {
// initialize serial communication at 9600 bits per second:
Serial.begin(9600);

// Now set up two tasks to run independently.
xTaskCreate(
TaskBlink
, (const portCHAR *)"Blink" // A name just for humans
, 128 // Stack size
, NULL
, 2 // priority
, NULL );
xTaskCreate(TaskBlink2,(const portCHAR *)"Blink2",128, NULL,2,NULL );
xTaskCreate(TaskBlink3,(const portCHAR *)"Blink3",128, NULL,2,NULL );
xTaskCreate(TaskBlink4,(const portCHAR *)"Blink4",128, NULL,2,NULL );

xTaskCreate(
TaskTadaa
, (const portCHAR *) "Tadaa"
, 128 // This stack size can be checked & adjusted by reading Highwater
, NULL
, 1 // priority
, NULL );

// Now the task scheduler, which takes over control of scheduling individual tasks, is automatically started.
}

void loop()
{
// Empty. Things are done in Tasks.
}

/*--------------------------------------------------*/
/*---------------------- Tasks ---------------------*/
/*--------------------------------------------------*/

void TaskBlink(void *pvParameters) // This is a task.
{
(void) pvParameters;

// initialize digital pin 13 as an output.
pinMode(13, OUTPUT);

for (;;) // A Task shall never return or exit.
{
digitalWrite(13, HIGH); // turn the LED on (HIGH is the voltage level)
Serial.println("LED 13 Nyala");
vTaskDelay( 1000 / portTICK_PERIOD_MS ); // wait for one second
digitalWrite(13, LOW); // turn the LED off by making the voltage LOW
Serial.println("LED 13 Padam");
vTaskDelay( 1000 / portTICK_PERIOD_MS ); // wait for one second
}
}
void TaskBlink2(void *pvParameters){
(void) pvParameters;
pinMode(2, OUTPUT);
for (;;) {
digitalWrite(2, HIGH); vTaskDelay( 2000 / portTICK_PERIOD_MS );Serial.println("LED 2 Nyala");
digitalWrite(2, LOW); vTaskDelay( 2000 / portTICK_PERIOD_MS );Serial.println("LED 2 Padam");
}
}

void TaskBlink3(void *pvParameters){
(void) pvParameters;
pinMode(3, OUTPUT);
for (;;) {
digitalWrite(3, HIGH); vTaskDelay( 500 / portTICK_PERIOD_MS );Serial.println("LED 3 Nyala");
digitalWrite(3, LOW); vTaskDelay( 1500 / portTICK_PERIOD_MS );Serial.println("LED 3 Padam");
}
}

void TaskBlink4(void *pvParameters){
(void) pvParameters;
pinMode(4, OUTPUT);
for (;;) {
digitalWrite(4, HIGH); vTaskDelay( 500 / portTICK_PERIOD_MS );Serial.println("LED 4 Nyala");
digitalWrite(4, LOW); vTaskDelay( 250 / portTICK_PERIOD_MS );Serial.println("LED 4 Padam");
}
}

void TaskTadaa(void *pvParameters) // This is a task.
{
(void) pvParameters;
for (;;)
{
// read the input on analog pin 0:
n++;
if (n>100){n = 0;}
// print out the value you read:
Serial.print("Tadaa...");
Serial.println(n);
vTaskDelay(2000/portTICK_PERIOD_MS);// 2 second delay
// one tick delay (15ms) in between reads for stability
}
}
323f (5) amp (1) android (12) apple (7) arduino (18) art (1) assembler (21) astina (4) ATTiny (23) blackberry (4) camera (3) canon (2) cerita (2) computer (106) crazyness (11) debian (1) delphi (39) diary (286) flash (8) fortran (6) freebsd (6) google apps script (8) guitar (2) HTML5 (10) IFTTT (7) Instagram (7) internet (12) iOS (5) iPad (6) iPhone (5) java (1) javascript (1) keynote (2) LaTeX (6) lazarus (1) linux (29) lion (15) mac (28) macbook air (8) macbook pro (3) macOS (1) Math (3) mathematica (1) maverick (6) mazda (4) microcontroler (35) mountain lion (2) music (37) netbook (1) nugnux (6) os x (36) php (1) Physicist (29) Picture (3) programming (189) Python (109) S2 (13) software (7) Soliloquy (125) Ubuntu (5) unix (4) Video (8) wayang (3) yosemite (3)